The maximum performance available in a cement-based grout. Provides consistent color, Microban to resist stain-causing mold and mildew. Contains Kevlar for strength and durability.
LATICRETE PermaColor Grout is easy to install, just mix with water, no additive required. Ideal for both floors and walls-joints 1/16 (1.5 mm) to 1.2 (12 mm). For both interior and exterior applications.
LATICRETE PermaColor Grout offers the maximum performance available in a cement-based grout, providing consistent color and Microban to resist stain-causing mold and mildew. LATICRETE PermaColor Grout is easy to install - just mix with water. LATICRETE PermaColor Grout is ideal for floors and walls in both interior and exterior installations. When you must use a cement-based grout, choose LATICRETE PermaColor Grout.
25 lb bag
Grout Color Chart
Grout Coverage Calculations
Physical Properties:
- Tensile Strength (28 Day) = 510 psi (3.5 MPa)
- Compressive Strength = 4500 psi (31.0 MPa)
- Flexural Strength = 1250 psi (8.62 MPa)
- Linear Shrinkage (7 day) = 0.0450%
Working Properties:
- Pot Life = 40-60 min at 70°F (21°C)
- Final Set = 3 hrs
- Heavy Foot Traffic = 6 hrs
Specifications subject to change without notification. Results shown are typical but reflect test procedures used. Actual field performance will depend on installation methods and site conditions.
Advantages:
- Consistent Color
- Mixes with water only
- Ideal for floors and walls ( Joint Widths of 1/16-1/2" [1.5 to 12 mm])
- Inhibits Mold and Mildew with Microban
- Component of LATICRETE 15 Year Residential Warranty (see DS 230.14)
- Improved Stain Resistance for a Cement Based Grout
- Interior and Exterior Applications
- Residential and Commercial
LARGE VOLUME ORDERS PLEASE CALL 1-866-955-TILE (8453) FOR SPECIAL PRICING
