Full Unit Kit includes:
- 1 x 6 gal (23 l) pail liquid
- 1 x 300 ft2 (28 m2) roll fabric 38" (965 mm wide)
- 1 x 75 ft (23 m) long roll fabric 6" (150 mm wide)
APPROXIMATE COVERAGE FOR FULL UNIT IS 300 SQFT.
To View Shipping Quote Proceed to Checkout Page.
LATICRETE 9235 Waterproofing Membrane is The Industry Standard for wet areas and continuous water submersion applications.
Applies with a paint roller or brush, cures in just hours and provides a permanent waterproofing base for tile, glass mosaic and stone in pools, showers and spas.
LATICRETE 9235 Waterproofing Membrane is accepted by IAPMO and ICC for shower pans, meets ANSI A118.10 and ANSI A118.12, is non-hazardous and meets all V.O.C. requirements.
When anti-fracture treatment is required in wet areas, LATICRETE 9235 Waterproofing Membrane provides the complete package. You only need one product to protect your floor from water damage and substrate cracks. Inhibits the growth of stain-causing mold and mildew in membranes with Microban antimicrobial product protection. Extra Heavy service rating per ASTM C627 (TCNA).
Advantages:
- Inhibits stain causing mold and mildew growth in the substrate with Microban antimicrobial product protection
- Safe-no solvents and non-flammable
- Interior and exterior use
- Vertical and horizontal surfaces (including ceilings)
- Thin-only 0.02" (0.5 mm) thick when cured
- Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
- "Extra Heavy Service" rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test).
- IAPMO and ICC Approval
- Applies quickly with a paint brush or roller-no special mixing or application equipment needed
- Fast cure-normally ready in hours for finishes
- Install tile, brick and stone directly onto membrane
- Certified by The GREENGUARD Institute
- Easy cleanup-just use water while fresh
- Protects concrete & reinforcing steel from corrosion
Uses:
- Swimming pools, fountains & water features
- Shower pans, stalls & tub surrounds
- Bathrooms & laundries (industrial, commercial and residential)
- Spas, hot tubs
- Kitchens & Food Processing Areas
- Terraces & balconies over unoccupied spaces
- Countertops
- Facades
- Steam rooms (when used in conjunction with a vapor barrier)
Suitable Substrates:
- Concrete
- Cement Mortar Beds
- Cement Plaster
- Concrete and Brick Masonry
- Exterior Glue Plywood*
- Gypsum Wallboard*
- Ceramic Tile and Stone**
- Cement Terrazzo**
- Cement Backer Board***
* Interior Applications Only;
** If skim coated with a LATICRETE Latex Thin-Set Mortar;
*** Consult cement backer board manufacturer for specific installation recommendations and to verify acceptability for exterior use.
LARGE VOLUME ORDERS PLEASE CALL 1-866-955-TILE (8453) FOR SPECIAL PRICING
