A premium thin-set mortar that can be used for interior use on both floors and walls. Unique high tack and long adjustment time. Ideal for use over masonry, concrete, cement backerboard, mortar beds and gypsum wallboard*.
LATICRETE 272 Mortar is a high performance bagged cementitious powder to be mixed with either water or latex admixture to install ceramic tile and stone using the thin-set method of installation.
Mix with LATICRETE 333 Super Flexible Additive for increased performance or LATICRETE 3701 Mortar Admix for exterior use.
MEETS ANSI A118.1 Strength Requirements.
50 lb bag
Approximate Coverage: per 50 lb (22.7 kg) Bag
*55-65 ft2/50 lb bag (5.1-6.0/22.7 kg bag) with 1/4" x 3/8" (6 mm x 9 mm) notched trowel.
*75-90 ft2/50 lb bag (7.0-8.4/22.7 kg bag) with 1/4" x 1/4" (6 mm x 6 mm) notched trowel.
*Coverage will vary depending on trowel notch size, type and size of tile, and substrate.
Uses:
Designed for interior or exterior installation of ceramic tile and stone for walls and floors.
Advantages:
- High Tack-will hang tile without slippage.
- Dual Purpose-for walls and floors.
- Cleans with water.
- Easy to Use-plastic, workable and long open time.
- High Bond Strength-200% stronger than mastic type adhesives.
- Safe-non-flammable and non-toxic during storage, application and after hardening.
Suitable Substrates:
- Concrete
- Cement plaster
- Exterior glue plywood (interior only)*
- Gypsum wall board (interior only)
- Cement terrazzo**
- Cement mortar beds
- Concrete masonry
- Brick masonry
- Ceramic tile and stones**
- Cement backer board***
* When mixed with LATICRETE® 333 Super Flexible Additive.
** When mixed with LATICRETE 3701 Mortar Admix.
*** Consult cement backer board manufacturer for specific installation recommendations and to verify acceptability for exterior use.
LARGE VOLUME ORDERS PLEASE CALL 1-866-955-TILE (8453) FOR SPECIAL PRICING
