LATICRETE 220 Marble and Granite Mortar is a fortified dry-set mortar specifically formulated to provide a one-step installation for large format ceramic tile, marble and stone, including ungauged tiles or installing tiles on a rough surface. Mix with water. Can be built up to 3/4" (18 mm). Supports heavy tiles and stone, reducing lippage problems. For increased performance over hard to bond surfaces, mix with LATICRETE 333 Super Flexible Additive. Mix with LATICRETE 3701 Mortar Admix for exterior use.
Coverage:
Approximately 25-35 sq. ft (2.3-3.2 m2) per 50 lb (22.7 kg) with 3/4" (18 mm) half loop or with 1/2" x 1/2" (12 mm x 12 mm) square notch.
Advantages:
- Eliminates the need for costly leveling and pre-float beds.
- Supports heavy tiles and stone, reducing lippage problems.
- For interior and exterior applications.
- Build up to 3/4" (18 mm) without shrinkage or set-up time problems.
Suitable Substrates:
- Concrete
- Cement mortar beds
- Ceramic tile and stone*
- Exterior glue plywood** (interior only)
- Cement terrazzo
- Cement backer board***
* Requires use of LATICRETE 3701 Mortar Admix.
** Requires use of LATICRETE 333 Super Flexible Additive.
*** Consult cement backer board manufacturer for specific installation recommendations and to verify acceptability for exterior use.
LARGE VOLUME ORDERS PLEASE CALL 1-866-955-TILE (8453) FOR SPECIAL PRICING
