LATICRETE LATAPOXY 310 Rapid Stone Adhesive is a two component, high strength epoxy adhesive, which is formulated for spot bonding fixing method of tile and stone installations on vertical surfaces. LATAPOXY 310 Rapid Stone Adhesive maintains its non-sag consistency at high temperatures up to 95°F (35°C).
Offers major advantages in terms of speed and productivity over mechanical anchoring, plaster and wire, and the thin-set method of veneer installation. Easier to work with when compared to traditional methods; no drilling, cutting of kerfs or setting of pins. LATAPOXY® 310 Rapid Stone Adhesive allows for quick, easy plumb adjustment while stone is in place to compensate for uneven walls and stone thickness variations.
LATICRETE LATAPOXY 310 Rapid Stone Adhesive is permanent; it will not fail or deteriorate over time and is ICC and IBC approved.
10 liters - 2 parts - 2 x 5 liters
Approximate Coverage per 10 Liter Unit:
The coverage for LATAPOXY 310 Rapid Stone Adhesive will vary depending upon the amount of product required to plumb the wall.
*300-325 ft2 (27-30 m2) at Plumb Wall (3 mm) with 1/8" Latapoxy Thickness (3 mm)
*150-170 ft2 (14-16 m2) out 1/4" (6 mm) with 1/4" Latapoxy Thickness (6 mm)
*75-80 ft2 (7-7.5 m2) out 1/2" (12 mm) with 1/2" Latapoxy Thickness (12 mm)
Uses:
- Spot bonding marble, granite and large format ceramic tile on walls and overheads, interior and exterior applications.
- Adhesive for bonding masonry, precast concrete and stone panels.
- Ideal for fireplace surrounds, elevators and stair risers.
- Adhesive for bedding and fastening marble, granite and other stone slabs on walls and wainscoting.
- Adhesive for fabricating granite, marble and other stone.
- Approved by TCNA for Interior applications method W215 and W260
Advantages:
- Fast Permanent Bond-5-8 minutes.
- Easy to Use-1:1 mixing ratio by volume.
- Non-Staining-ideal for white and light colored?marbles, other stones and tiles.
- Withstands shock and vibration.
- Durable Permanent Bond-will not deteriorate over time.
- Safe-no solvents.
- Non-Sag-when applied up to 1" (25 mm) thick.
- Approved by the following building code bodies for exterior installations: ICC and IBC.
Acceptable Substrates:
Please consult LATICRETE Technical Services at 1.800.243.4788, ext. 235 for specific installation details.
Interior Substrates:
- Concrete
- Concrete masonry units (CMU)
- Brick/masonry
- Exterior glue plywood
- Cement backer board*
- Steel**
* Consult cement backer board manufacturer for specific installation recommendations.
** Steel surface must be cleaned to remove oil, dust oxidation and other bond inhibiting materials.
Exterior Substrates:
Please consult LATICRETE Technical Services at 800.243.4788, ext. 235 for approval prior to use for all exterior applications.
There is a maximum height restriction of 30 ft (9.1 m).
For exterior installations outside of North America, contact the LATICRETE International Department at 1.800.243.4788, ext. 242.
- Concrete
- Must be minimum 6" (150 mm) thick reinforced
- Must be minimum 3500 psi (24 MPa)
- Must be minimum 28 days old prior to installation
- CMU
- Double wythe walls only
LARGE VOLUME ORDERS PLEASE CALL 1-866-955-TILE (8453) FOR SPECIAL PRICING
