LATICRETE LATAPOXY 310 Stone Adhesive is a two component, high strength epoxy adhesive, which is formulated for spot bonding fixing method of tile and stone installations on vertical surfaces. LATAPOXY 310 Stone Adhesive maintains its non-sag consistency at high temperatures up to 95°F (35°C).
Offers major advantages in terms of speed and productivity over mechanical anchoring, plaster and wire, and the thin-set method of veneer installation. Easier to work with when compared to traditional methods; no drilling, cutting of kerfs or setting of pins. LATAPOXY® 310 Stone Adhesive allows for quick, easy plumb adjustment while stone is in place to compensate for uneven walls and stone thickness variations.
LATICRETE LATAPOXY 310 Stone Adhesive is permanent; it will not fail or deteriorate over time and is ICC and IBC approved.
1 liter - 2 parts - 2 x 1/2 liter
Approximate Coverage per 10 Liter Unit:
*300-325 ft2 (27-30 m2) at Plumb Wall (3 mm) with 1/8" Latapoxy Thickness (3 mm)
*150-170 ft2 (14-16 m2) out 1/4" (6 mm) with 1/4" Latapoxy Thickness (6 mm)
*75-80 ft2 (7-7.5 m2) out 1/2" (12 mm) with 1/2" Latapoxy Thickness (12 mm)
Uses:
- Spot bonding marble, granite and large format ceramic tile on walls and overheads, interior and exterior applications.
- Adhesive for bonding masonry, precast concrete and stone panels.
- Ideal for fireplace surrounds, elevators and stair risers.
- Adhesive for bedding and fastening marble, granite and other stone slabs on walls and wainscoting.
- Adhesive for fabricating granite, marble and other stone.
- Approved by TCNA for Interior applications method W215 and W260
Advantages:
- Fast Permanent Bond-45 minutes to 1 hour set time.
- Easy to Use-1:1 mixing ratio by volume.
- Non-Staining-ideal for white and light colored?marbles, other stones and tiles.
- Withstands shock and vibration.
- Durable Permanent Bond-will not deteriorate over time.
- Safe-no solvents.
- Non-Sag-when applied up to 1" (25 mm) thick.
- Approved by the following building code bodies for exterior installations: ICC and IBC.
Acceptable Substrates:
Please consult LATICRETE Technical Services at 1.800.243.4788, ext. 235 for specific installation details.
Interior Substrates:
- Concrete
- Concrete masonry units (CMU)
- Brick/masonry
- Exterior glue plywood
- Cement backer board*
- Steel**
* Consult cement backer board manufacturer for specific installation recommendations.
** Steel surface must be cleaned to remove oil, dust oxidation and other bond inhibiting materials.
Exterior Substrates:
Please consult LATICRETE Technical Services at 800.243.4788, ext. 235 for approval prior to use for all exterior applications.
There is a maximum height restriction of 30 ft (9.1 m).
For exterior installations outside of North America, contact the LATICRETE International Department at 1.800.243.4788, ext. 242.
- Concrete
- Must be minimum 6" (150 mm) thick reinforced
- Must be minimum 3500 psi (24 MPa)
- Must be minimum 28 days old prior to installation
- CMU
- Double wythe walls only
LARGE VOLUME ORDERS PLEASE CALL 1-866-955-TILE (8453) FOR SPECIAL PRICING
