LATICRETE LATAPOXY 310 Stone Adhesive Cartridges is a two component, high strength epoxy adhesive, which is formulated for spot bonding fixing method of tile and stone installations on vertical surfaces. LATAPOXY 310 Stone Adhesive maintains its non-sag consistency at high temperatures up to 95°F (35°C).
Offers major advantages in terms of speed and productivity over mechanical anchoring, plaster and wire, and the thin-set method of veneer installation. Easier to work with when compared to traditional methods; no drilling, cutting of kerfs or setting of pins. LATAPOXY® 310 Stone Adhesive allows for quick, easy plumb adjustment while stone is in place to compensate for uneven walls and stone thickness variations.
LATICRETE LATAPOXY 310 Stone Adhesive is permanent; it will not fail or deteriorate over time and is ICC and IBC approved.
Carton of 15 Cartridges.
Cartridge packs—2.3 gal (9 l) containing the following:
- 15 cartridge packs of Part A and Part B
(For use in LATAPOXY® 310 Cordless Mixer)
Cartridge Pack Coverage
One carton (15 cartridges) will yield approximately 150 ft2 (14 m2) with 1/4" (6 mm) thick dabs, or 300 ft2 (27 m2) with 1/8" (3 mm) thick dabs when covering 10% of the veneer surface.
Uses:
- Spot bonding marble, granite and large format ceramic tile on walls and overheads, interior or exterior applications.
- Adhesive for bonding masonry, precast concrete and stone panels.
- Ideal for fireplace surrounds, elevators and stair risers.
- Adhesive for bedding and fastening marble, granite and other stone slabs on walls and wainscoting.
- Adhesive for fabricating granite, marble and other stone.
- Approved by TCNA for Interior applications method W215 and W260
Advantages:
- Fast Permanent Bond-45 minutes to 1 hour set time.
- Easy to Use-1:1 mixing ratio by volume.
- Non-Staining-ideal for white and light colored marbles, other stones and tiles.
- Withstands shock and vibration.
- Durable permanent bond, will not deteriorate over time.
- Safe-no solvents.
- Non-Sag-when applied up to 1" (25 mm) thick.
- Approved by the following building code bodies for exterior installations: ICC, IBC.
Acceptable Substrates:
Please contact LATICRETE Technical Services at 800.243.4788, ext. 235 for specific installation details.
Interior Substrates:
- Concrete
- Concrete masonry units (CMU)
- Brick/masonry
- Exterior glue plywood
- Cement backer board*
- Steel**
* Consult cement backer board manufacturer for specific installation recommendations.
** Steel surface must be cleaned to remove oil, dust oxidation and other bond inhibiting materials.
Exterior Substrates:
Please consult LATICRETE Technical Services at 800.243.4788, ext. 235 for approval prior to use for all exterior applications.
There is a maximum height restriction of 30 ft (9.1 m).
For exterior installations outside of North America, contact the LATICRETE International, Inc. International Department at 800.243.4788, ext. 242.
- Concrete
- Must be minimum 6" (150 mm) thick reinforced
- Must be minimum 3500 psi (24 MPa)
- Must be minimum 28 days old prior to installation
- CMU
- Double wythe walls only
LARGE VOLUME ORDERS PLEASE CALL 1-866-955-TILE (8453) FOR SPECIAL PRICING
