A high-strength, 3-part 100% solids epoxy adhesive formulated for chemical resistant installations of quarry tile, brick and packing house tile. Prevents curling of water-sensitive marbles and agglomerates. Recommended for mesh mount glass mosaics and resin backed tiles and stones. Will not stain white or light colored marbles.
Extra Heavy service rating per ASTM C627 (TCNA). Meets ANSI A118.3 criteria.
LATICRETE LATAPOXY 300 Adhesive is a chemical resistant, epoxy adhesive that will bond to most sound, clean surfaces. Adhesive spreads easily and cleans with water while fresh. LATAPOXY 300 Adhesive is a factory-proportioned kit consisting of epoxy resin, hardener and chemical resistant silica filler. LATAPOXY 300 Adhesive can be used in interior and exterior (see limitations) walls and floors, wet and dry areas.
Approximate Coverage: per #2 Unit
* 180-200 ft2 (16.7-18.6 m2) with 1/16" (1.5 mm) v-notched trowel.
* 90-110 ft2 (8.4-10.2 m2) with 1/8" x 1/8" (3 mm x 3 mm) square trowel.
* 70-80 ft2 (6.5-7.4 m2) with 3/16" (4 mm) v-notched trowel.
* 30-35 ft2 (2.8-3.3 m2) with 1/4" x 1/4" (6 mm x 6 mm) square trowel.
* Coverage will vary depending on trowel notch size, type and size of tile, and substrate.
Uses:
For heavy duty commercial chemical resistant installations in food processing areas, commercial kitchens, restaurants, etc. Also use LATAPOXY 300 Adhesive to install all types of ceramic tile, marble and natural stone over post-tensioned and precast floor systems. Also recommended for rubber flooring and wood block floors, the installation of green marble, white marble, and resin backed tiles and stones agglomerate marbles that have a tendency to stain, darken or warp when installed with water-based installation materials.
Advantages:
- Water cleanable.
- No flammable solvents are required to clean tools or finished work.
- Ideal for installing moisture sensitive marble and agglomerate tiles.
- Ideal for the installation of resin backed tile, mosaics, stone, and agglomerates.
- Non-staining on white and light-colored marble.
- High bond strength.
- Maximum chemical resistance.
Suitable Substrates:
- Concrete
- Ceramic tile and stones
- Exterior glue plywood*
- Concrete masonry
- Brick masonry
- Non-water soluble cut-back adhesive*
- Vinyl or other resilient tile*
- Cement mortar beds
- Gypsum wallboard*
- Cement plaster
- Cement terrazzo
- Plastic laminate*
- Cement backer board**
- Steel
* Interior application only.
** Consult cement backer board manufacturer for specific installation recommendations and to verify acceptability for exterior use.
LARGE VOLUME ORDERS PLEASE CALL 1-866-955-TILE (8453) FOR SPECIAL PRICING
