An economical modified epoxy portland cement adhesive designed for tile and stone installations that are resistant to diluted chemicals, salts, and cleaning agents. Safe, odorless, and easy to use.
LATICRETE LATAPOXY 210 Adhesive is a modified emulsion epoxy adhesive designed for the installation and grouting of ceramic tile and stone on most sound, clean surfaces. LATAPOXY 210 Adhesive is a factory proportioned kit consisting of emulsified epoxy resin and hardener, and pre-blended portland cement and silica sand powder.
Extra Heavy service rating per ASTM C627 (TCNA). Meets ANSI A118.8.
Approximate Coverage: per Single Unit
* 80-90 ft2 (7.4-8.3 m2) with 1/8" x 1/8"(3 mm x 3mm) square trowel.
* 40-50 ft2 (3.7-4.6 m2) with 1/4" x 1/4" (6 mm x 6 mm) square trowel.
* 30-40 ft2 (2.7-3.7 m2) with 1/4" x 3/8" (6 mm x 9 mm) square trowel.
* Coverage will vary depending on trowel notch size, type and size of tile, and substrate.
Uses:
For commercial and residential installations of ceramic tile and stone over most sound, clean surfaces. Use where installations must resist physical abuse, shock and mild chemicals (interior & exterior).
Advantages:
- High Bond Strength
- Non-Toxic, Non-Flammable
- Economical
- Water Cleanable
- Easy to Use
- Mild Chemical Resistance
Suitable Substrates:
- Concrete
- Exterior glue plywood*
- Concrete masonry
- Brick masonry
- Steel
- Vinyl or other resilient tile*
- Cement mortar beds
- Gypsum wallboard*
- Cement plaster
- Cement terrazzo
- Plastic laminate*
- Existing ceramic tile and stone
- Cement backer board**
* Interior application only.
** Consult cement backer board manufacturer for specific installation recommendations and to verify acceptability for exterior use.
LARGE VOLUME ORDERS PLEASE CALL 1-866-955-TILE (8453) FOR SPECIAL PRICING
