LATAPOXY Waterproof Flashing Mortar is an epoxy-based 3 component, trowel applied, waterproofing, and vapor barrier membrane. It can be used to waterproof seams, gaps or joints between a variety of substrates and metal and PVC pipe penetrations or flashing. It is
specifically designed to be used under ceramic tile, stone or brick for rapid installations which require a fast curing waterproof flashing. LATAPOXY Waterproof Flashing Mortar is flexible, easy to apply and will allow for rapid installations.
Approximate Coverage
45 ft2/unit (4.2 m2) at 1/8" (3 mm) thick, depending on application
Uses
- Flashing for plumbing fixtures and pipe penetrations
- Waterproof seam between flashing and façade
- Swimming pools, fountains, and water features
- Shower pans, stalls, tub surrounds
- Bathrooms, & laundries (Industrial, commercial and residential)
- Kitchens and food processing areas
Advantages
- Fast curing
- Waterproof epoxy based formula
- Extremely flexible
- Easy to apply using a trowel
- Adheres to metal and PVC pipes, drains and flashing
- Waterproof seam between flashing and façade
Suitable Substrates
- Concrete
- Cement mortar beds
- Cement plaster
- Concrete and brick masonry
- Exterior glue plywood*
- Gypsum wallboard
- Ceramic tile and stone**
- Cement terrazzo**
- Cement backer board***
- Metal †
* Interior Applications Only, not for use in permanent wet areas.
** If skim coated with a LATICRETE® Latex Thin-Set Mortar.
*** Consult cement backer board manufacturer for specific installation recommendations and to verify acceptability for exterior use.
† Consult LATICRETE Technical Services prior to use, interior only.
Our Products
Bio Green Clean
Laticrete
Metroflor Konecto Vinyl
Aqua Mix
Sports Flooring
Flooring Products
Shower Systems, Waterproofing Membranes, Uncoupling Membranes
Floor Maintenance
Tile and Stone Tools
Transition Strips
Large Volume Orders Please Call 1-866-955-8453
