LATICRETE 333 Super Flexible Additive is an extraordinarily flexible latex additive for use with thin set mortars and other cement mixes. LATICRETE 333 Super Flexible Additive is specially formulated to provide a strong, super flexible bond to most surfaces, including plywood. Recommended for interior and exterior use with a LATICRETE thin-set.
Create highly flexible thin-set mortars with superior bond strength with this incredible liquid additive. Mixes with all LATICRETE pre-bagged thin-set mortars for installation over concrete, brick, block, portland cement backerboard, existing ceramic tile, cement terrazzo, exterior glue plywood*, gypsum wallboard*, vinyl tile*, linoleum*, plastic laminates* and non-soluble cut back adhesives*. Ideal for remodeling projects. ASTM C627 Rated for "Extra Heavy" Service.
Approximate Coverage:
* 35-40 ft2 per US gallon (0.85-1.00 m2 per liter) of LATICRETE® 333 Super Flexible Additive using a 1/4" x 1/4" (6 x 6 mm) notched trowel.
Uses:
Used in place of water with thin set mortars for installing: ceramic tile, brick, natural stone, and porcelain tile.
Advantages:
- Makes high strength shock resistant mortar.
- Strong, super flexible bond to many surfaces.
- Safe and water cleanable, non-hazardous, non-flammable liquid.
- Easy to use.
- Sag resistant.
Suitable Substrates:
- Concrete
- Cement mortar beds
- Ceramic tile and stones
- Concrete masonry
- Cement plaster
- Brick masonry
- Exterior glue plywood*
- Asphalt adhesives*
- Plastic laminate*
- Cement terrazzo
- Gypsum wallboard*
- Vinyl or other resilient tile*
- Cement backer board**
* Interior use only.
** Consult cement backer board manufacturer for specific installation recommendations and to verify acceptability for exterior use.
LARGE VOLUME ORDERS PLEASE CALL 1-866-955-TILE (8453) FOR SPECIAL PRICING
