GENERAL MAINTENANCE
Although KONECTO floors are durable, all floor coverings require some care to look their best and
many problems can be prevented before they occur. The type and frequency of traffic on your floor
will determine the frequency of maintenance needed. The type of floor and even the color will also
have some bearing on how much care may be necessary. For example, solid color floors will
visually show scuffs, scratches, dirt and general wear to a greater degree than multi-colors of chips
or patterns. Of course, white or light colors will visually show staining to a greater degree than
darker colors. For this reason, solid color and white floors should receive special attention in regard
to preventative maintenance and amount of care provided. Good judgment when choosing the type
and style of floor will help prevent maintenance problems before the floor is even installed!
Here are the proper steps for maintaining your KONECTO floor:
1. In order to prevent indentations and scratches, provide glass, plastic or other non-staining
cups with flat under surfaces not less than 2” in width for the legs of heavy furniture or
appliance. Equip swiveled-type office chairs and other rolling furniture with broad surface
non-staining casters at least 2” in diameter. Remove small diameter buttons from the legs
of straight chairs and replace with metal glides that have bearing surfaces no less than 1” in
diameter.
2. Protect your floor against burns. Burns from the glowing end of a cigarette, matches, or
other extremely hot items can damage KONECTO floors.
3. Do not flood floor or subject to frequent standing water. Problems associated with
excessive moisture can affect the job site and should be addressed. KONECTO plank
should not be used as a Moisture Reduction System.
4. Protect your floor from tracked-in-dirt and grit particles by using walk off mats at all outside
entrances. Take time to remove any imbedded grit particles from shoe soles before
entering the room. Avoid the use of rubber-backed mats, as certain rubber compounds can
permanently stain vinyl. Avoid tracking in tar or asphalt from driveways, as this can also
discolor vinyl. Do not use vinegar, one-step cleaner/polishes or oil soaps on KONECTO
products.
5. All KONECTO floors have a good resistance to stains. They are not affected by most
common household spills: however, any spill should be cleaned up immediately. The longer
the spilled materials are left on the floor, the greater the risk of permanently staining the
floor. For information regarding the proper method or solution to use on a specific stain,
contact KONECTO’s Technical Department or check troubleshooting guide.
7. Avoid exposure to direct sunlight for prolonged periods. During peak sunlight hours, the use
of the drapes or blinds is recommended. Prolonged direct sunlight can result in
discoloration, and excessive temperatures might cause tile expansion.
8. Do not use vinegar as a cleaning agent on KONECTO vinyl Products.
MAINTENANCE FOR KONECTO COMMERCIAL FLOORS
• The type frequency of traffic on your KONECTO floor will determine the frequency of
maintenance needed.
• The type of floor, and even the color, will have some bearing on how much care
may be necessary.
• Regular adherence to an effective maintenance program should include:
o thorough dirt and grit regulation and prompt removal of spills and stains
protection of the floor surface
The most effective part of any floor maintenance program is the simplest: sweep, dust mop or
vacuum KONECTO flooring DAILY, or more frequently if needed.
Initial Maintenance Upon Completion of the Installation:
1. Sweep or vacuum thoroughly and remove any adhesive residue from surface. Mineral
Spirits is fine for this.
2. Do not wash the floor for at least 24 hours after installation. Lightly damp mop with Konecto
Cleaner following instruction on bottle. Remove any scuffs and excessive soil by careful
scrubbing. Certain types of rubber heel marks may be removed by rubbing with a cloth
dampened in Metroflor Black Scuff and Adhesive Remover.
- 1 1 - R E V . 0 4 - 7 - 1 0
Routine Commercial Maintenance:
1. KONECTO vinyl plank and tile has excellent durability and a history of performing well in
heavy commercial installations as long as a sound maintenance program is followed. Light
daily sweeping, dust mopping or vacuuming will prevent dirt and grit particles from being
ground into the surface of the tile. Non-rubber, walk off mats should be used to control the
amount of dirt and grit reaching the floor. The mats should be as wide as the doorway and
thick enough to trap dirt. Frequent light mopping will prevent the floor from becoming
heavily soiled and will remove most spills and stains. The amount and type of traffic will
dictate the frequency of washing. Wash the floor by damp mopping or use an Auto-
Scrubbing machine with Konecto Cleaner following instructions on the bottle.
2. If the floor receives hard use and becomes extremely dirty, as in heavily used commercial
installations, Floor scrubbing with a 175-300 RPM floor Buffer will be necessary with a red
scrubbing-type (polyester or nylon) pad. Mop the floor with Konecto Cleaner and work the
solution over the floor using the buffer and the scrubbing pad. After this has been done,
remove the dirty residue by damp mopping with a clean bucket of Konecto Cleaner
following instructions on bottle. Let floor dry, you will then see a light film residue, take low
speed buffer and a White polishing pad and buff until the film is removed. Please Note: Do
not use a buffer that is more than 300 RPM under any circumstances.
Stain Removal:
To remove stubborn spots or stains from KONECTO Luxury Vinyl floors, always begin with mild
cleaners such as Konecto Cleaner. If this fails to remove stain, use mineral spirits. Do not use
harsh solvents such as lacquer thinner, as these can permanently soften the vinyl surface.
For extreme staining (paints, permanent markers, dyes) try applying fingernail polish remover
containing acetone (not straight acetone) applied to a soft cloth and rubbing. Any damage
resulting from use of pure solvents IS NOT covered by warranty. Always test stronger cleaning
agents on sample pieces or in unnoticeable areas first.
For commercial customers working on a large project or an ongoing project we have a special National Accounts team to assist you. A National Account representative will work with you from design to delivery to ensure that your project is completed on time and on budget. Our National Account representatives are some of the most knowledgeable people in the flooring industry and dedicated to providing outstanding service.
Find out why we are the trusted flooring supplier for companies and organizations around the world. Call 1-866-955-8453 and ask for the National Accounts department.
Here is a few examples of the type of companies and organizations we work with:
Grocery store chains
National Retailers
Assisted Living and Nursing facilities
Medical Offices
Salons
Apartments
Government facilities
Churches
Casinos
Corporate Offices
Manufacturing Facilities
Flooring Retailers & Contractors
